Imperia Cleaner Instructions

Showers and Bathroom Floors�

Mixture: Pour the 8oz bottle of Imperia Cleaner into a 24oz to 32oz spray bottle. Fill the rest with hot water and shake well. 

*** Note � For soap scum from bar soaps you may need to mix solution a little stronger and use a scrubbing pad to agitate.***

 Application:

1)     Make sure shower is dry.

2)     Spray shower with solution. (Minimum once a week)

3)     Let solution dwell for 7-10 minutes.

4)     Use a wet sponge to agitate the floor, glass enclosure and walls.

5)     Rinse well.

Mildew: 

1)  If mildew appears in your shower, use 1/2 bleach with 1/2 water.

2)  Let dwell then agitate with a brush or sponge.

3)  Rinse well then reapply the cleaning method above.

 *** Note- For customers with natural stone only apply Bleach mixture if your stone has been sealed.*** 

Floors� 

Mixture: Pour  (1/4 bottle) of Imperia Tile and Grout Cleaner or Stone Cleaner to 1 gallon of hot water. Add more if needed. 

Application:

1)     Mop solution on floor in a circular motion.

2)     Use a brush to agitate the dirty grout lines.

3)     Mop the grout lines that were agitated to remove excessive dirt.

4)     Let dry, no rinsing necessary.

Glass

Mixture: Pour one cap full of Imperia Cleaner into a 24oz to 32oz spray bottle.  Fill the rest of the container with hot water and shake well.  

Application:  Simply spray on and wipe off.